You can use the Charging Anti Vibration Module SPC+ with the following SP Connect mounts:. If you already have an existing mount, you don’t need an additional adapter to attach it. The Charging Anti Vibration Module SPC+ has the same connection as th
If your Charging Anti Vibration Module SPC+ is connected to a power source but your smartphone is not charging, the issue could be due to one of the following factors:. First, ensure that the power source is 5V/2A and check all connections. If possib
The Charging Anti Vibration Module SPC+ is compatible with the following cables:. USB Connection:. Direct 12V Connection:. This cable is designed for use on motorcycles but is also compatible with e-bike motors that have a 12V output. For e-bike moto
Our SPC+ delivers a wireless charge of up to 15 watts. However, the actual charging speed may vary due to various factors. For example, the performance may depend on the smartphone you use and how well it works with the charging module. Some phones a
The Charging Anti Vibration Module SPC+ requires a minimum input voltage of 5 volts and 2 amps. For fast charging at 7.5 W and 10 W, an adapter with a minimum output of 9 volts and 1.67 amps is required. To optimize the fast charging function, we rec
The Charging Anti Vibration Module is easily and conveniently swapped with the head of the respective mount. Simply insert the damping into the mounting ring, tighten the screw with 5Nm and off you go! Please find the LINK to the instructions here.
The Charging Anti Vibration Module and the included USB-C/USB-A cable do not feature voltage conversion. For direct connection to a battery, you will need the Cable 12V DC. We recommend connecting this cable to the positive terminal of the ignition t
Unfortunately, no. The classic SPC Phone Case can only be used with the Charging Anti-Vibration Module with the SPC Adapter. However, the distance created by the adapter between the smartphone and the charging station prevents inductive charging. For
Unfortunately, it is not possible to align the cable connector independently of the position of the Anti-Vibration Module. For technical reasons, the cable is designed as a fixed component of the mount, and an alternative design is currently not feas
No, the included USB-A cable is not designed to be connected directly to a motorcycle battery or E-bike motor. It does not contain a voltage regulator to adjust the power output to the level required for your smartphone. For a safe direct connection,
No, the Charging Anti Vibration Module can only be used with a designated SP Connect Phone Case. The SP Connect Universal solutions are not compatible with the Wireless Powerbank due to their design. The construction creates an unavoidable gap betwee